Skip to main content

Create CDM Plan​

Select

SaaS
Customer Managed

Create a CDM Plan

Request Body
  • planName string required

    Name of the new plan

  • backupDestinations object[] required

    Copy destinations for the plan. Specify where you want to store your data.

  • backupDestinationName string required

    Backup destination details. Enter the name during creation.

  • storagePool object
  • id int32
  • name string
  • storageTemplateTags object[]

    It is used in Global config template plan creation. Needs in plan creation on global commcell

  • id int32
  • name string
  • value string
  • storageType StorageType

    Possible values: [ALL, DISK, CLOUD, HYPERSCALE, TAPE]

  • netAppCloudTarget boolean

    Only for snap copy. Enabling this changes SVM Mapping to NetApp cloud targets only.

  • isConfiguredForReplication boolean

    Used if the copy is used for replication group

  • isSnapCopy boolean

    Is this a snap copy? If isMirrorCopy is not set, then default is Vault/Replica.

  • isMirrorCopy boolean

    Is this a mirror copy? Only considered when isSnapCopy is true.

  • region object
  • id int32
  • GUID string
  • name string
  • sourceCopy object
  • id int32
  • name string
  • backupsToCopy string

    Possible values: [All_JOBS, ALL_FULLS, HOURLY_FULLS, DAILY_FULLS, WEEKLY_FULLS, MONTHLY_FULLS, QUARTERLY_FULLS, HALF_YEARLY_FULLS, YEARLY_FULLS, ADVANCED]

    All_JOBS means SYNCHRONOUS copy type, others are applicable for SELECTIVE copy Type only.

  • fullBackupTypesToCopy PlanFullBackupTypeToCopy

    Possible values: [FIRST, LAST]

    Which type of backup type should be copied for the given backup destination when backup type is not all jobs. Default is LAST while adding new backup destination.

  • backupStartTime int32

    Backup start time in seconds. The time is provided in unix time format.

  • optimizeForInstantClone boolean

    Flag to specify if primary storage is copy data management enabled.

  • overrideRetentionSettings boolean

    Tells if this copy should use storage pool retention period days or the retention defined for this copy. Set as true to use retention defined on this copy.

  • retentionRuleType RententionRuleTypes

    Possible values: [RETENTION_PERIOD, SNAP_RECOVERY_POINTS]

    Which type of retention rule should be used for the given backup destination

  • retentionPeriodDays int32

    Possible values: >= 1 and <= 9999

    Default value: 30

    Retention period in days. -1 can be specified for infinite retention. If this and snapRecoveryPoints both are not specified, this takes precedence.

  • snapRecoveryPoints int32

    Possible values: >= 1

    Number of snap recovery points for snap copy for retention. Can be specified instead of retention period in Days for snap copy.

  • useExtendedRetentionRules boolean

    Use extended retention rules

  • extendedRetentionRules object

    If you want to update, specify the whole object. Extended retention rules should be bigger than retention period.

  • firstExtendedRetentionRule object
  • isInfiniteRetention boolean

    If this is set as true, no need to specify retentionPeriodDays.

  • retentionPeriodDays int32

    If this is set, no need to specify isInfiniteRetention as false.

  • type string

    Possible values: [All_JOBS, ALL_FULLS, HOURLY_FULLS, DAILY_FULLS, WEEKLY_FULLS, MONTHLY_FULLS, QUARTERLY_FULLS, HALF_YEARLY_FULLS, YEARLY_FULLS, ADVANCED]

    All_JOBS means SYNCHRONOUS copy type, others are applicable for SELECTIVE copy Type only.

  • secondExtendedRetentionRule object
  • isInfiniteRetention boolean

    If this is set as true, no need to specify retentionPeriodDays.

  • retentionPeriodDays int32

    If this is set, no need to specify isInfiniteRetention as false.

  • type string

    Possible values: [All_JOBS, ALL_FULLS, HOURLY_FULLS, DAILY_FULLS, WEEKLY_FULLS, MONTHLY_FULLS, QUARTERLY_FULLS, HALF_YEARLY_FULLS, YEARLY_FULLS, ADVANCED]

    All_JOBS means SYNCHRONOUS copy type, others are applicable for SELECTIVE copy Type only.

  • thirdExtendedRetentionRule object
  • isInfiniteRetention boolean

    If this is set as true, no need to specify retentionPeriodDays.

  • retentionPeriodDays int32

    If this is set, no need to specify isInfiniteRetention as false.

  • type string

    Possible values: [All_JOBS, ALL_FULLS, HOURLY_FULLS, DAILY_FULLS, WEEKLY_FULLS, MONTHLY_FULLS, QUARTERLY_FULLS, HALF_YEARLY_FULLS, YEARLY_FULLS, ADVANCED]

    All_JOBS means SYNCHRONOUS copy type, others are applicable for SELECTIVE copy Type only.

  • mappings object[]
  • vendor

    Possible values: [NETAPP, AMAZON, PURE, AZURE]

    Snapshot vendors available for Snap Copy mappings

  • source object
  • id int32
  • name string
  • target object
  • id int32
  • name string
  • sourceVendor object
  • id int32
  • name string
  • targetVendor object
  • id int32
  • name string
  • rpo object

    Recovery Point Objective (RPO) is the maximum amount of time that data can be lost during a service disruption. Your RPO determines the frequency of your backup jobs.

  • backupFrequency object
  • schedules object[]
  • scheduleId int32

    Id of the schedule if available, required for modifying, deleting schedule

  • scheduleName string

    Name of the schedule, for modify

  • policyId int32

    Schedule policy Id to which the schedule belongs

  • scheduleOperation string

    Possible values: [ADD, DELETE, MODIFY]

    Default value: MODIFY

    Operation being performed on schedule

  • vmOperationType string

    Possible values: [PLANNED_FAILOVER, TEST_BOOT]

    Type of DR operation (only applicable for Failover groups)

  • backupType string required

    Possible values: [FULL, INCREMENTAL, DIFFERENTIAL, SYNTHETICFULL, TRANSACTIONLOG]

    Schedule Backup level

  • forDatabasesOnly boolean

    Default value: false

    Boolean to indicate if schedule is for database agents

  • isRetentionBasedSyntheticFull boolean

    Default value: false

    Boolean to indicate if synthetic full schedule is based on retention rules

  • schedulePattern object required

    Used to describe when the schedule runs

  • scheduleFrequencyType string required

    Possible values: [MINUTES, DAILY, WEEKLY, MONTHLY, YEARLY, AUTOMATIC]

    schedule frequency type

  • frequency int32

    Possible values: >= 1

    Frequency of the schedule based on schedule frequency type eg. for Hours, value 2 is 2 hours, for Minutes, 30 is 30 minutes, for Daily, 2 is 2 days. for Monthly 2 is it repeats every 2 months

  • weeklyDays string[]

    Possible values: [SUNDAY, MONDAY, TUESDAY, WEDNESDAY, THURSDAY, FRIDAY, SATURDAY]

    Days of the week for weekly frequency

  • dayOfMonth int32

    Possible values: >= 1 and <= 31

    Day on which to run the schedule, applicable for monthly, yearly

  • weekOfMonth string

    Possible values: [FIRST, SECOND, THIRD, FOURTH, LAST]

    Specific week of a month

  • dayOfWeek string

    Possible values: [SUNDAY, MONDAY, TUESDAY, WEDNESDAY, THURSDAY, FRIDAY, SATURDAY, DAY, WEEKDAY, WEEKEND_DAYS]

  • monthOfYear string

    Possible values: [JANUARY, FEBRUARY, MARCH, APRIL, MAY, JUNE, JULY, AUGUST, SEPTEMBER, OCTOBER, NOVEMBER, DECEMBER]

  • repeatIntervalInMinutes int32

    Possible values: >= 1

    How often in minutes in a day the schedule runs, applicable for daily, weekly, monthly and yearly frequency types.

  • repeatUntilTime int32

    Until what time to repeat the schedule in a day, requires repeatIntervalInMinutes

  • timezone object
  • id int32
  • name string
  • startTime int32

    Default value: 75600

    start time of schedule in seconds

  • startDate int32

    start date of schedule in epoch format

  • endDate int32

    Schedule end date in epoch format

  • noOfTimes int32

    The number of times you want the schedule to run.

  • exceptions object[]

    Exceptions to when a schedule should not run, either in dates or week of month and days

  • onDates int32[]

    Possible values: >= 1 and <= 31

    list of dates in a month. For ex: 1, 20

  • onWeekOfTheMonth string[]

    Possible values: [FIRST, SECOND, THIRD, FOURTH, LAST]

    On which week of month, for ex: FIRST, LAST

  • onDayOfTheWeek string[]

    Possible values: [SUNDAY, MONDAY, TUESDAY, WEDNESDAY, THURSDAY, FRIDAY, SATURDAY, DAY, WEEKDAY, WEEKEND_DAYS]

    On which days, for ex: MONDAY, FRIDAY

  • daysBetweenSyntheticFulls int32

    Possible values: >= 6

    No of days between two synthetic full jobs

  • maxBackupIntervalInMins int32

    Default value: 240

    The number of mins to force a backup on automatic schedule.

  • scheduleOption object

    Specific options to be set on schedules

  • useDiskCacheForLogBackups boolean

    Used to enable disk caching feature on databases for automatic schedules on server plan

  • commitFrequencyInHours int32

    Commit frequency in hours for disk cache backups from automatic schedules

  • daysBetweenAutoConvert int32

    Number of days between auto conversion of backup level applicable for databases on incremental and differential schedules of server plan

  • o365ItemSelectionOption string

    Possible values: [SELECT_ALL, SELECT_NEVER_PROCESSED, SELECT_MEETING_SLA, SELECT_NOT_MEETING_SLA_PROCESSED_ATLEAST_ONCE, SELECT_FAILED_LAST_ATTEMPT, SELECT_PROCESSED_ATLEAST_ONCE, SELECT_NOT_MEETING_SLA, SELECT_MEETING_SLA_NOT_RECENTLY_BACKED_UP]

    item backup option for O365 V2 backup jobs

  • jobRunningTimeInMins int32

    total job running time in minutes

  • minBackupIntervalInMins int32

    Default value: 15

    The min number of mins to check for file activity on automatic schedule.

  • logFilesThreshold int32

    Default value: 50

    The min number of archived log files before a backup job should start

  • logsDiskUtilizationPercent int32

    Default value: 80

    The min log destination disk threshold percentage

  • operationType string

    Possible values: [ADD, MODIFY, DELETE, NONE, OVERWRITE]

    Operation type for the list

  • backupWindow object[]

    Backup window for incremental backup

  • dayOfWeek string[]

    Possible values: [SUNDAY, MONDAY, TUESDAY, WEDNESDAY, THURSDAY, FRIDAY, SATURDAY]

  • startTime int64

    Time in seconds since the beginning of the day

  • endTime int64

    Time in seconds since the beginning of the day

  • fullBackupWindow object[]

    Backup window for full backup

  • dayOfWeek string[]

    Possible values: [SUNDAY, MONDAY, TUESDAY, WEDNESDAY, THURSDAY, FRIDAY, SATURDAY]

  • startTime int64

    Time in seconds since the beginning of the day

  • endTime int64

    Time in seconds since the beginning of the day

  • snapshotOptions object

    This feature applies only to File System Agents

  • snapRecoveryPoints int32

    Possible values: >= 1

    Number of snap recovery points for default snap copy for retention. Can be specified instead of retention period in Days for default snap copy.

  • retentionPeriodDays int32

    Default value: 30

    Retention period in days. -1 can be specified for infinite retention. If this and snapRecoveryPoints both are not specified, this takes precedence.

  • enableBackupCopy boolean

    Flag to enable backup copy

  • backupCopyRPOMins int32

    Default value: 240

    Backup copy RPO in minutes

  • databaseOptions object

    This feature applies only to database agents

  • logBackupRPOMins int32

    Log backup RPO in minutes

  • useDiskCacheForLogBackups boolean

    Use disk cache for log backups

  • commitFrequencyInHours int32

    Commit frequency in hours

Responses

Success

Schema
  • plan object
  • id int32
  • GUID string
  • name string
  • errors object[]
  • component string

    Plan Entity for which error occured

  • errorCode int32

    Error Code for plan

  • errorMessage string

    Error message for plan

Loading...